Universal two-component primer is usually used as 2-in-1 anticorrosive primer and surfacer. EP Primer has an excellent adhesion to most types of surfeces.
​
EU/2004/42 Cat II B(c) VOC 520 g/l, VOC limit 540 g/l
Color: gray
Pack: 0.8 l; 4 l

One-component epoxy primer in an aerosol can is designed to isolate areas of the treated surface ground to metal before painting. It is highly resistant to corrosion and is a good insulator. Provides reliable metal protection. Ideal for quick minor repairs.
Color: gray
EU/2004/42 Cat II B(e) VOC 680 g/l, VOC limit 840 g/l
Pack: 520 ml

Two-component self etching primer. It provides high corrosion resistance for metal surfaces and has an excellent adhesion to them. Chromate free.

EU/2004/42 Cat II B(c) VOC 760 g/l, VOC limit 780 g/l
Color: yellow
Pack: 0.8 l

One-component fast-drying self etching primer. It provides high level of corrosion protection and good adhesion to steel, aluminum, galvanized metal. Chromate free.
​
EU/2004/42 Cat II B(c) VOC 720 g/l, VOC limit 780 g/l
Color: gray
Pack: 0.8 l

Washprimer Spray is 1K anticorrosive primer specially developed for spot repairs. Washprimer Spray should be used to cover bare metal areas to prevent corrosion processes and to increase adhesion of the topcoats. It could be directly overpainted with enamel or (when necessary) with filler-surfacer without sanding.

EU/2004/42 Cat II B(e) VOC 680 g/l, VOC limit 840 g/l
Color: gray
Nominal volume: 520 ml

One-component anticorrosive alkyd primer. Uniprimer is specially developed for corrosion prevention of metal parts.
​
EU/2004/42 Cat II B(с) VOC 710 g/l, VOC limit 540 g/l
Color: gray
Pack: 1 kg

Barrier Primer is specially developed for insulation of the thermoplastic coatings before the overpainting. Barrier Primer is an easy-to-use product that forms thin non-sandable coating.
​
EU/2004/42 Cat II B(e) VOC 640 g/l, VOC limit 840 g/l
Color: gray
Pack: 0.5 l

1K adhesion promoter for plastics allows to exclude the gas-flame treatment of the surface.
​
EU/2004/42 Cat II B(а) VOC 830 g/l, VOC limit 850 g/l
Color: transparent
Pack: 0.5 l

A one-component plastic primer in an aerosol can is intended for primary priming of plastic parts and improving the adhesion of the paintwork to the surface of plastic, including polypropylene, parts without the use of flame treatment.

EU / 2004/42 Cat II B (e) VOC 750 g / l, VOC limit 840 g/l
Color: transparent, gray
Nominal Volume: 520 ml

Plastic Plus is 2K filler specially developed to use for plastic repairs. Plastic Plus has an excellent adhesion to most types of plastic and it could be applied with wet-on-wet technique.
​
EU/2004/42 Cat II B(c) VOC 650 g/l, VOC limit 540 g/l
Color: gray
Pack: 0.8 l